TECNA TE95 Resistance Welding Controls

Cable Resistance Car Body Shop Welders FOR SALE at TECNADirect.com

TECNA TE95 is a microprocessor welding control unit designed for cable resistance welders for car body shops. Differently from a standard control unit, TECNA TE95 carries out two different working cycles for gun and multifunction gun; moreover, the multifunction gun working cycle is equipped with the sheets heating function. The TECNA TE95 can be used for welders with both pneumatic and hand-operated gun.

TECNA TE95 FEATURES

TECNA TE95 Welding Control Unit | TECNADirect.com

  • Synchronous thyristor drive with phase shift control for welding current adjustment.
  • Simplified programming by means of four buttons.
  • Adjustment of first phase shift delay to obtain the best balance of machine line current.
  • Control of solenoid valve 24 Vdc 7,2 W Max with protected output against any short circuit.
  • Separate working cycles for gun and multifunction gun.

GUN WORKING CYCLE

  • Slope and pulse functions.
  • Secondary current compensation function for welding of oxidised sheets and rods.
  • Autoretain disabling for manually operated welders.

MULTIFUNCTION GUN WORKING CYCLE

  • Welding time and welding current adjustment independent from gun adjustments.
  • Sheets heating function.
  • Synchronous thyristor drive.
  • Phase shift control for welding current adjustment.
  • 6 working modes to carry out operating sequences on different welding machines.
  • Simplified programming by means of four push-buttons.
  • Slope and pulse functions.
  • Single and repeat operating mode.
  • Secondary current compensation function for welding of oxidised sheets and rods.
  • Autoretain disabling for either manually operated welders or for obtaining fast stop circuits.
  • First phase-shift delay adjustment to obtain the best balance of machine line current.
  • Control of solenoid valve 24 Vdc 7,2 W Max with protected output against short circuits.

PROGRAMMABLE PARAMETERS

PARAMETER

RANGE

Gun parameters:
SQUEEZE 01 – 50 cycles
SLOPE 00 – 29 cycles
WELD TIME* 01 – 65 cycles
CURRENT 01 – 99 %
COLD TIME 01 – 50 cycles
IMPULSE NUMBER 00 – 09
HOLD TIME 01 – 50 cycles
COMPENSATION 00 – 01
WELD / NO WELD 00 – 01
Multifunction gun parameters:
WELD TIME 01 – 50 cycles
CURRENT 01 – 99 %
HEATING 00 – 01

CONTROLS SERVICE AND REPAIR

Our highly skilled and knowledgeable repair department technicians provide repair and rebuild services for TECNA resistance welding controls. We can provide simple adjustments and replacement parts, along with complete rebuilds. When a new control is recommended, we can perform a retrofit installation to your existing equipment.

CONTROLS QUOTE REQUEST

TECNA Control Units from TECNADirect.com are available NOW. For more information, on the TECNA resistance welding controls, REQUEST A QUOTE, or give us a call at 844-44-TECNA or +1-216-475-5629 for IN-STOCK inventory available now with immediate shipping.

TECNADirect.com

TECNADirect.com, powered by Weld Systems Integrators, is a stocking master distributor of TECNA tool balancers. We keep an inventory of TECNA balancers IN-STOCK at our Warrensville Heights, Ohio location for quick shipment and delivery.

Weld Systems Integrators, Inc., manufacturer of rugged, innovative, high-quality resistance welding equipment and machinery. For more information on Weld Systems Integrators visit www.wsiweld.com.

Print Friendly, PDF & Email