TECNA ZERO Gravity Tool Balancers FOR SALE
No-Gravity Balancers for Easy Handling and Operation
What Are Zero-Gravity Tool Balancers?
Zero-gravity balancers (sometimes called no-gravity balancers) use a conical drum, calibrated to provide constant upward tension that counterbalances the weight of the suspended tool or load. This achieves a floating neutral support where gravity is essentially negated, allowing near-effortless positioning, while maintaining the load in the operator’s last position (see video below – ZERO gravity vs. retractor).
The key advantage of zero gravity balancers is that tools stay fixed wherever the operator places them within the unit’s range of travel. There is no automatic retraction. This allows freely maneuvering tools through the entire work envelope without fighting a retracting spring.
TECNA zero-gravity spring tool balancers feature an aluminum alloy or nylon housing and carry their load on a stainless steel wire rope. With zero-gravity models available from 0.4 to 396 lbs. (0.2 – 180 kg.), TECNA has the balancer you need to provide improved balance and easy handling.
| FEATURE | ZERO-GRAVITY BALANCER | RETRACTOR BALANCER |
| Tool Positioning | Stays put when released | Auto-retracts to rest position |
| Range of Motion | Full – no retracting resistance | Self-retracting – some resistance |
| Load Stability | Stable at any point | Can drift from the set position |
| Ease of Adjustment | Fixed spring tension | Adjustable via a tension knob |
| Cycle Efficiency | Slower tool changes | Faster to reset for the next use |
| Work Organisation | Tools positioned randomly | Tools consistently in set places |
VARIATION “.F” is equipped with a friction/brake which controls the rotation speed of the drum (example: TECNA 9354.F).
VARIATION “G” includes shock absorbent rubber coating (example: TECNA 9354G).
VARIATION “G.F” includes friction/brake and shock absorbent rubber coating (example: TECNA 9354G.F).
VARIATION “.B” includes the locking-unlocking device with control from the floor. It’s not possible to assemble this device on balancers already installed (example: TECNA 9401.B).
VARIATION “.B1” includes an enhanced locking-unlocking device with improved control from the floor (chain and handle in stainless steel ). It is not possible to assemble this device on balancers already installed (example: TECNA 9401.B1).
VARIATION “G.B” and “G.B1” include shock absorbent rubber coating and enhanced locking-unlocking device (example: TECNA 9401G.B and 9401G.B1).
If you have questions or would like help selecting the right zero-gravity balancer for your application, please contact a customer service representative at 844-44-TECNA or 216-475-5629. or salesteam@wsiweld.com.
Do zero-gravity and retractor balancers have weight capacity differences?
No, Tecna offers both types of balancers across the full range of capacities from 0.5 kg to over 150 kg. Load ratings are consistent for a given size unit regardless of the gravity or retractor mechanism.
Can zero-gravity balancers replace hoists or cranes?
Within their load capacity range, zero gravity balancers provide excellent maneuverability. But for suspended loads exceeding 150 kg, a powered hoist is recommended over manual handling.
Are retractor balancers faster for repetitive tasks?
Yes, the automatic return generally allows users to re-engage tools more rapidly compared to manual repositioning with zero gravity models. This improves cycle times.
Do retractor balancers require less training for operators?
Retractor balancers involve minimal training since tools always retract to set locations. Zero-gravity models require teaching users best practices to position loads ergonomically and avoid pinch points.
Can one workstation utilize both zero-gravity and retractor balancers?
Yes, TECNA’s balancers feature standardized mounting so a single workstation can be equipped with the best type of balancer for each particular tool requirement.
Are zero-gravity units better for manipulating objects like bins?
Yes, the ability to move loads anywhere without automatic retraction aids precise manipulation of containers, baskets, and other items.
| Available TECNA Retractors and Zero-Gravity Tool Balancers | ||||||
|---|---|---|---|---|---|---|
| Standard | Air Hose | Bowden | ESD-Protected | Explosion-Resistant | Food Industry | Nylon Cable |
 |  |  |  |  |  |  |
| Buy TECNA Retractors and Tool Balancers | SEARCH / BUY NOW | |||||
CONTACT TECNADirect.com
For more information, on the TECNA spring tool balancers and retractors, REQUEST A QUOTE, or give us a call at 844-44-TECNA or 216-475-5629 for IN-STOCK inventory available now with immediate shipping.
TECNADirect.com, powered by Weld Systems Integrators, a stocking master distributor of TECNA tool balancers. We keep an inventory of TECNA balancers IN-STOCK at our Warrensville Heights, Ohio location for quick shipment and delivery.
Weld Systems Integrators, Inc., is a manufacturer of rugged, innovative, high-quality resistance welding equipment and machinery. For more information on Weld Systems Integrators visit www.wsiweld.com.