TECNA 9323 Retractor Balancer
Stainless Steel Cable | Capacity 13.2 – 17.6 lbs. | 79 in. Stroke
TECNA Balancer Model: 9323
TECNA 9323 stainless steel cable retractor tool balancer FOR SALE at Weld Systems Integrators. TECNA 9323 balancers feature an aluminum housing and suspend the tool on a 79 in. (2000 mm) stainless steel wire rope for 13.2 – 17.6 lbs. (6.0 – 8.0 kg) loads.
- Balancer type: Retractor
- Cable: Stainless steel
- Housing / body: Aluminum
- Capacity: 13.2 – 17.6 lbs. (6.0 – 8.0 kg)
- Stoke length: 79 in. (2000 mm)
INVENTORY:
1 in stock
Additional information
| Model | 9323 |
|---|---|
| Balancer Style | Retractor Tool Balancer |
| Balancer Family | Standard Steel Cable Balancer |
| Cable / Rope Type | Stainless Steel |
| Rubber Guard (G Option) | Optional |
| Balancer Stroke Length (in.) | 79 in. |
| Balancer Stroke Length (mm) | 2000 mm |
TECNA Stainless Steel Cable Retractor Balancer Standard Features
- Rugged construction, cast aluminum body.
- Stainless steel rope
- Adjustable capacity
- Auxiliary safety suspension
- Adjustable stroke limiting device
- Cable guide in antifriction material
- Inert spring drum assembly
- Polyamides thimble
- Models 9320 – 9323: Safety device against load dropping due to the spring breakage (>3kg).
* Features may vary, and are subject to change without notice. Please contact your TECNA representative to request a quote.
TECNA Stainless Steel Cable Retractor Balancer Selection Guide
Retractor tool balancers use a spring mechanism to keep the tool hanging slightly below the balancer when in the rest position. To use the tool, the operator pulls down to unwind a cable. When the operator’s task is complete, the tool can again be safely returned to the rest position. While in use, the operator will feel a slight pull from the retractor, as the tool is under continuous pressure from a spring.
TECNA standard retractor tool balancers feature a nylon or aluminum housing, and suspend the tool on a stainless steel wire rope. Optional accessories include:
- Accessory unit with air hose 0.32 / 0.39 in. (8 – 10 mm)
- Accessory unit with air hose 0.43 / 0.63 in. (11 – 16 mm)
NOTE: Available for certain models, please contact a customer service representative for help selecting the right product for your application.
Balancers models 9336 – 9350 are equipped with a stop device that allows the load to be stopped in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.