TECNA 3233 MFDC – 50 kVA
TECNA 3233 C-Type Suspended Weld Gun
50 kVA | Air-Operated | MFDC / Inverter
WSI Stock / Serial #: TECNA-3233
The TECNA 3233 is a 50 kVA, MFDC / inverter, air-operated, c-type spot weld gun. TECNA inverter technology offers advantages over single-phase AC, including greater welding quality and precision, more efficient use of electricity, smaller size, and less electrical loss due to impedance (power savings).
- Model: TECNA 3233
- Gun type: C-type
- Power @ 50% duty cycle: 50 kVA
- Power supply: MFDC / inverter
- Max. weld current: 19,000 amps
- Max. weld force: 674 lbs.
WSI maintains an inventory of new and used resistance welding equipment, including TECNA rocker arm spot welders at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or 216-475-5629 for immediate assistance.
Please submit the following form to request additional information.
Enter “TECNA-3233” on the following quote request form.
If you have any questions, please call 844-WSI-WELD or 216-475-5629 and ask to speak with a WSI Engineer.
| MODEL | Nominal power @ 20% (kVA) | Nominal power @ 50% (kVA) | Short circuit current (kA) | Max. electrode force at 6 bar (lbs. / daN) | Net weight (lbs. / kg) |
|---|---|---|---|---|---|
| 3233 | 80 | 50 | 19 | 674.43 lbs. / 300 daN | 63.93 lbs. / 29 kg |
The TECNA 3233 is a 50 kVA, MFDC / inverter, air-operated, c-type spot weld gun. TECNA inverter technology offers advantages over single-phase AC, including greater welding quality and precision, more efficient use of electricity, smaller size, and less electrical loss due to impedance (power savings).
- Model: TECNA 3233
- Gun type: C-type
- Power @ 50% duty cycle: 50 kVA
- Power supply: MFDC / inverter
- Max. weld current: 19,000 amps
- Max. weld force: 674 lbs.
INVENTORY:
Additional information
| Gun Type | C-type |
|---|---|
| kVA | 50 kVA |
| Power Supply | MFDC / Inverter |
| Max. Weld Current | 19,000 amps |
| Max. Weld Force | 674 lbs. |
TECNA Stainless Steel Cable Retractor Balancer Standard Features
- Rugged construction, cast aluminum body.
- Stainless steel rope
- Adjustable capacity
- Auxiliary safety suspension
- Adjustable stroke limiting device
- Cable guide in antifriction material
- Inert spring drum assembly
- Polyamides thimble
- Models 9320 – 9323: Safety device against load dropping due to the spring breakage (>3kg).
* Features may vary, and are subject to change without notice. Please contact your TECNA representative to request a quote.
TECNA Stainless Steel Cable Retractor Balancer Selection Guide
Retractor tool balancers use a spring mechanism to keep the tool hanging slightly below the balancer when in the rest position. To use the tool, the operator pulls down to unwind a cable. When the operator’s task is complete, the tool can again be safely returned to the rest position. While in use, the operator will feel a slight pull from the retractor, as the tool is under continuous pressure from a spring.
TECNA standard retractor tool balancers feature a nylon or aluminum housing, and suspend the tool on a stainless steel wire rope. Optional accessories include:
- Accessory unit with air hose 0.32 / 0.39 in. (8 – 10 mm)
- Accessory unit with air hose 0.43 / 0.63 in. (11 – 16 mm)
NOTE: Available for certain models, please contact a customer service representative for help selecting the right product for your application.
Balancers models 9336 – 9350 are equipped with a stop device that allows the load to be stopped in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.
