TECNA 3230 MFDC – 50 kVA

TECNA 3230 Scissor-Type Suspended Weld Gun

50 kVA | Air-Operated | MFDC / Inverter

WSI Stock / Serial #: TECNA-3230

The TECNA 3230 is a 60 kVA, MFDC / inverter, air-operated, scissor-type spot weld gun. TECNA inverter technology offers advantages over single-phase AC, including greater welding quality and precision, more efficient use of electricity, smaller size, and less electrical loss due to impedance (power savings).

  • Model: TECNA 3230
  • Gun type: Scissor-type
  • Power @ 50% duty cycle:  50 kVA
  • Power supply: MFDC / inverter
  • Max. weld current: 19,000 amps
  • Max. weld force: 854 lbs.
  • Max. electrode throat depth: 20 in.

WSI maintains an inventory of new and used resistance welding equipment, including TECNA rocker arm spot welders at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or 216-475-5629 for immediate assistance.

QUOTE REQUESTSpecifications

Please submit the following form to request additional information.

Enter “TECNA-3230” on the following quote request form.

If you have any questions, please call 844-WSI-WELD or 216-475-5629 and ask to speak with a WSI Engineer.

    Contact Information
    * Full Name:
    * Company Name:
    City:
    State:
    Postal Code / Zip:
    * Country:
    * Phone:
    * Email:
    Preferred way to be contacted:
    Equipment Needs
    Equipment Request:
    TECNA Model / Serial Number:
    * Tell us about your application (what are you welding?): Send us a photo of your parts:

    * Required


    If you experience any issues submitting this form, please give us a call at 844-WSI-WELD or 216-475-5629.

    MODEL Nominal power @ 20% (kVA) Nominal power @ 50% (kVA) Short circuit current (kA) Max. electrode force at 6 bar 5.91 in. (150 mm) arms (lbs. / daN) Net weight (lbs. / kg)
    3230 80 50 19 854.27 lbs. / 380 daN 72.75 lbs. / 19 kg

    The TECNA 3230 is a 60 kVA, MFDC / inverter, air-operated, scissor-type spot weld gun. TECNA inverter technology offers advantages over single-phase AC, including greater welding quality and precision, more efficient use of electricity, smaller size, and less electrical loss due to impedance (power savings).

    • Model: TECNA 3230
    • Gun type: Scissor-type
    • Power @ 50% duty cycle:  50 kVA
    • Power supply: MFDC / inverter
    • Max. weld current: 19,000 amps
    • Max. weld force: 854 lbs.
    • Max. electrode throat depth: 20 in.

    INVENTORY:

    Additional information

    Gun Type

    Scissor-type

    kVA

    50 kVA

    Power Supply

    MFDC / Inverter

    Max. Weld Current

    19,000 amps

    Max. Weld Force

    854 lbs.

    Max. Electrode Throat Depth

    20.00 in.

    TECNA Stainless Steel Cable Retractor Balancer Standard Features

    • Rugged construction, cast aluminum body.
    • Stainless steel rope
    • Adjustable capacity
    • Auxiliary safety suspension
    • Adjustable stroke limiting device
    • Cable guide in antifriction material
    • Inert spring drum assembly
    • Polyamides thimble
    • Models 9320 – 9323: Safety device against load dropping due to the spring breakage (>3kg).

    * Features may vary, and are subject to change without notice. Please contact your TECNA representative to request a quote.

    TECNA Stainless Steel Cable Retractor Balancer Selection Guide

    Retractor tool balancers use a spring mechanism to keep the tool hanging slightly below the balancer when in the rest position. To use the tool, the operator pulls down to unwind a cable. When the operator’s task is complete, the tool can again be safely returned to the rest position. While in use, the operator will feel a slight pull from the retractor, as the tool is under continuous pressure from a spring.

    TECNA standard retractor tool balancers feature a nylon or aluminum housing, and suspend the tool on a stainless steel wire rope. Optional accessories include:

    • Accessory unit with air hose 0.32 / 0.39 in. (8 – 10 mm)
    • Accessory unit with air hose 0.43 / 0.63 in. (11 – 16 mm)

    NOTE:  Available for certain models, please contact a customer service representative for help selecting the right product for your application.

    Balancers models 9336 – 9350 are equipped with a stop device that allows the load to be stopped in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.