TECNA 6023D MFDC Press-Type Spot Welder

30 kVA – 3-Phase Inverter Press-Type Spot Welder from TECNADirect.com

TECNA WTP-6023D is a powerful 30 kVA press-type spot welders available from TECNADirect.com. The TECNA 6023D is designed to meet every need of spot welding. Furthermore, the frame of this press-type welder series has been designed by TECNA so to facilitate the operator’s work. The control unit, the pneumatic commands and the pressure gauge have been placed at the top so to enable the operator to use them smoothly.

The inverter technology, which these machines are provided with, allows a higher welding quality, an extreme precision in time and current and a reduction in costs, installation ones included. The welding time is adjusted in milliseconds thus allowing the best set-up. The welding current is supplied continuously and constantly and is not affected by the dimensions of the welding circuit.

TECNA 6023D – Welding time is adjusted in milliseconds thus allowing the best set-up.

For more information, on the TECNA 6023D, REQUEST A QUOTE, or give us a call at 844-44-TECNA or +1-216-475-5629 for IN-STOCK inventory available now with immediate shipping.

TECNA 6023D FEATURESSPECIFICATIONSOPTIONS
  • Medium frequency welders, designed to obtain high quality welding.
  • Chrome-copper electrode-holders for heavy duty and long life, designed for both straight and angled fitting on the arm.
  • Water-cooled transformer, electrode-holders and electrodes; transformer windings coated in epoxy resin.
  • Microprocessor control unit TE751 provided with wide screen.
  • (optional) USB port for data storage.
  • Lubrication free cylinder and pneumatic components which eliminate oil mist.
  • Two-stage electric foot-pedal for clamping and welding pieces only if correctly positioned.
  • Pre-connection for an additional electric foot-pedal for the direct recalling of welding program No. 2. This function is helpful when different kinds of welding are to be performed on the same piece.
SPECIFICATIONS UNITS WTP-6022D WTP-6022DA WTP-6023D WTP-6023DA
Standard Control TE751 TE700 TE751 TE700
Power @ 50% Duty Cycle kVA 30 30 30 30
Max Power kVA 85 85 85 85
No-Load Secondary Voltage V 6.1 6.1 6.1 6.1
Short Circuit Current A 19,000 19,000 19,000 19,000
Thermal Current @ 100% kA 3.4 3.4 3.4 3.4
Maximum Welding Current on Aluminum kA 17.1 17.1 17.1 17.1
Maximum Welding Current on Steel kA 15.2 15.2 15.2 15.2
Supply Voltage (@60Hz)* V 440 440 440 440
Delayed Fuses @ 440VAC A 30 30 30 30
Primary Cables Ø (up to 30m) mm² 10 10 10 10
Insulation Class F F F F F
Compressed Air Supply psi (bar) 94.3-145 (6.5-10) 94.3-145 (6.5-10) 94.3-145 (6.5-10) 94.3-145 (6.5-10)
Air Consumption per 1000 Spots @ 94 psi (650kP / 6.5 bar) SCF (N/m³) 307-92 (8.7-2.6) 307-92 (8.7-2.6) 191-60 (5.4-1.7) 191-60 (5.4-1.7)
Arm Minimum Length in (mm) 15.7 (400) 15.7 (400) 19.7 (500) 19.7 (500)
Max Electrode Force @ 94 psi (6.5 bar) lbs. (daN) 1034 (470) 1034 (470) 660 (300) 660 (300)
Working Stroke in (mm) 0.2-3.2 (5-80) 0.2-3.2 (5-80) 0.2-3.2 (5-80) 0.2-3.2 (5-80)
Arm Maximum Length in (mm)
Max Electrode Force @ 94 psi (6.5 bar) lbs. (daN)
Working Stroke in (mm)
Manual Retraction Stroke (Standard) in (mm) 2.4 (60) 2.4 (60) 2.4 (60) 2.4 (60)
Water Cooling @ 36 psi (250 kP / 2.5 bar) gpm (lpm) 1.6 (6) 1.6 (6) 1.6 (6) 1.6 (6)
Min/Max Water Pressure psi (bar) 36-58 (2.5-4) 36-58 (2.5-4) 36-58 (2.5-4) 36-58 (2.5-4)
Aerial Noise Produced dB(A) <70 <70 <70 <70
Working Stroke in (mm) 0.8 (20) 0.8 (20) 0.8 (20) 0.8 (20)
Welding Time Cycles 23 23 22 22
Welding Current kA 12.7 12.7 13.1 13.1
Working Rating (Welds per Minute) #/min 15 15 15 15
Net Weight lbs (kg) 407 (185) 407 (185) 411.4 (187) 411.4 (187)
Ø Arms in (mm) 1.97 (50) 1.97 (50) 1.97 (50) 1.97 (50)
Ø Electrode Holders in (mm) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4)
Electrode Taper Size 4RW/1MT 4RW/1MT 4RW/1MT 4RW/1MT
Short Circuit Current with Arms @ Max Length kA
Adjustable Arm Gap Assembly (OPTION 4638)
Short Circuit Current with Arms @ Max Gap kA 10 12.1
Minimum Gap in (mm) 6.7 (170) 6.7 (170)
Maximum Gap in (mm) 19.7 (500) 19.7 (500)
Measured Conditions
Working Stroke in (mm) 0.8 (20) 0.8 (20) 0.8 (20) 0.8 (20)
Welding Time Cycles 23 23 22 22
Welding Current kA 12.7 12.7 13.1 13.1
Working Rating (Welds per Minute) #/min 15 15 15 15
*May be supplied capable of operating on other voltages/frequencies. Please ask for details.

=Standard =Optional

Item
6022
Item
6023
Item
6022A
Item
6023A
Photo Description
TE751 control unit
TE700 control unit
Item 6034
Adjustable double stroke for cylinder 470 daN
Item 6035 Adjustable double stroke for cylinder 300 daN
Item 72628 Two-hand safety control on pedestal, adjustable height. Recomended for the operator safety according to the working requirements. It can be used only on welders equipped with optional control unit TE700.
Item 6032 Foot pedal for double stroke.
Item 73070 Additional foot-pedal for program no. 2.
Item 6033
USB interface board.
Item 4638 Adjustable arms large gap assembly for item 6023. The more the arms gap, the less the welding current.
Item 4571 Brass arm with reduced overall dimension with tip.
Item 4577 Brass arm with reduced overall dimension with tip (for items 6020D/6021D/6023D with option 4638).
Item 4578 Brass arm with reduced overall dimensions with frontal electrode (for items 6020D/6021D/6023D with option 4638).

TECNADirect.com by Weld Systems Integrators

TECNADirect.com, a division of Weld Systems Integrators, maintains an inventory of TECNA welding equipment, including rocker arm spot welders, press-type spot welders and press / projection welders. In addition, we also carry a complete line of bench welders, portable spot welding guns, tool balancers and accessories. Contact us TODAY at 844-44-TECNA, and ask about our IN-STOCK inventory at our Warrensville Heights, Ohio location.

Print Friendly, PDF & Email