TECNA 8203D AC – 100 kVA
TECNA 8203D Press-Type Spot and Projection Welder
100 kVA | Air-Operated | Single-Phase AC
WSI Stock / Serial #: TECNA-8203D
The TECNA 8203D is a 100 kVA, air-operated, single-phase AC press-type spot and projection welder with a water-cooled transformer, plates, electrode holders, and electrodes. The mounted TE550 control unit has been positioned to allow the operator to view welding data even during the working cycle. The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading.
- Model: TECNA 8203D
- Power @ 50% duty cycle: 100 kVA
- Power supply: Single-phase AC
- Max. weld current: 41,000 amps
- Max. weld force: 1,654 lbs.
- Max. electrode throat depth: 15.35 in.
- Max. projection plate throat depth: 10.63 in.
WSI maintains an IN-STOCK inventory of new and used resistance welding equipment at our Warrensville Heights, Ohio location for quick shipment and delivery. Contact our knowledgeable sales team at 844-WSI-WELD or 216-475-5629 for immediate assistance.
Please submit the following form to request additional information.
Enter “TECNA-8203D” on the following quote request form.
If you have any questions, please call 844-WSI-WELD or 216-475-5629 and ask to speak with a WSI Engineer.
- Modular design in mechanical structure, arms, brackets, and cylinders.
- Cylinder with chrome plated stem for heavy-duty work and long life; adjustable anti-rotation device.
- Lubrication-free pneumatic components to eliminate oil mist and protect the environment.
- Head descent without pressure for set up and service.
- Double-stroke cylinder with key control.
- Built-in compressed air filter unit and tank.
- Compressed air disconnecting device.
- Electrodes speed control valves, shock absorbers for the end of the stroke, and air discharge silencers ensure the minimum noise.
- Two-stage electric foot control for clamping and welding pieces only if correctly positioned.
- Pre-setting for additional double-stage electric foot connection for the direct recalling of welding program no.2.
- Water-cooled transformer, plates, electrode-holders, and electrodes; transformer with epoxy resin-coated windings.
- TE550 constant current microprocessor control unit.
- Synchronous SCR contactor insulated from cooling water circuit with protection thermostat.
- Standard on all models: two-hand safety control with timer assuring the best safety, and removable key selector. The two-hand control push-buttons are standard on projection models only (they are available on request on spot welder models).
- Emergency push-button to stop the machine immediately.
* May be supplied capable of operating on other voltages/frequencies. Please ask for details.
* Different voltages and frequencies on request. Specifications are subject to change without notice.
- 8230 – Valve to stop the flow of the water cooling when the machine is off and flow switch which makes the welder stop if the cooling water does not circulate.
- 8232 – Rotary selector for recalling the welding programs.
- 8234 – Double stroke control device with pneumatic foot instead of key one. To be used only for spot welding when the work necessarily requires it.
- 8235 – Cylinder 1242 daN (diameter 125 mm double stage) total stroke 100 mm (only on items 8201D..09D and 8214D).
- 8236 – Adjustable double stroke for cylinder 736 daN (standard).
- 8237 – Adjustable double stroke for cylinder 1242 daN (option 8235).
- 8238 – Low force squeeze for cylinder 736 daN (standard).
- 8239 – Low force squeeze for cylinder 1242 daN (option 8235).
- 8240 – Proportional valve.
- Constant energy welding control unit.
The TECNA 8203D is a 100 kVA, air-operated, single-phase AC press-type spot and projection welder with a water-cooled transformer, plates, electrode holders, and electrodes. The mounted TE550 control unit has been positioned to allow the operator to view welding data even during the working cycle. The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading.
- Model: TECNA 8203D
- Power @ 50% duty cycle: 100 kVA
- Power supply: Single-phase AC
- Max. weld current: 41,000 amps
- Max. weld force: 1,654 lbs.
- Max. electrode throat depth: 15.35 in.
- Max. projection plate throat depth: 10.63 in.
INVENTORY:
Additional information
| kVA | 100 kVA |
|---|---|
| Power Supply | Single-Phase AC |
| Max. Weld Current | 41,000 amps |
| Max. Weld Force | 1,654 lbs. |
| Max. Electrode Throat Depth | 15.35 in. |
| Max. Projection Plate Throat-Depth | 10.63 in. |
TECNA Stainless Steel Cable Retractor Balancer Standard Features
- Rugged construction, cast aluminum body.
- Stainless steel rope
- Adjustable capacity
- Auxiliary safety suspension
- Adjustable stroke limiting device
- Cable guide in antifriction material
- Inert spring drum assembly
- Polyamides thimble
- Models 9320 – 9323: Safety device against load dropping due to the spring breakage (>3kg).
* Features may vary, and are subject to change without notice. Please contact your TECNA representative to request a quote.
TECNA Stainless Steel Cable Retractor Balancer Selection Guide
Retractor tool balancers use a spring mechanism to keep the tool hanging slightly below the balancer when in the rest position. To use the tool, the operator pulls down to unwind a cable. When the operator’s task is complete, the tool can again be safely returned to the rest position. While in use, the operator will feel a slight pull from the retractor, as the tool is under continuous pressure from a spring.
TECNA standard retractor tool balancers feature a nylon or aluminum housing, and suspend the tool on a stainless steel wire rope. Optional accessories include:
- Accessory unit with air hose 0.32 / 0.39 in. (8 – 10 mm)
- Accessory unit with air hose 0.43 / 0.63 in. (11 – 16 mm)
NOTE: Available for certain models, please contact a customer service representative for help selecting the right product for your application.
Balancers models 9336 – 9350 are equipped with a stop device that allows the load to be stopped in intermediate positions of the stroke, about every 3.94 in. (100 mm). The stop device can be activated and deactivated at the operator’s choice.
