TECNA 7902 Portable Spot Weld Gun FOR SALE
Hand-Operated – 2.5 kVA at 50% duty cycle
TECNA WTG-7902 IN-STOCK and Available from TECNADirect.com
TECNA 7902 is a 2.5 kVA (at 50% duty cycle), semi-automatic, handheld, light-duty spot welding gun. Furthermore, this high-performance pulse spot welder is suitable for up to 0.098 in. + 0.098 in. (2.5 mm + 2.5 mm).
Featuring an extensive range of optional arms and accessories, the TECNA 7902 is perfect for a variety of general maintenance applications.
The TECNA WTG-7902 has replaced the TECNA and LORS / TECNA spot welding gun models 5048A, 5048B, 5148A and 5148B.
TECNA 7902 FEATURES
- Manually operated, no air or water lines to encumber movement.
- Versatile portable spot welder for auto body repair shops and maintenance shops.
- Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
- Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets.
- Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar.
- Force adjustment with scale in daN.
- Additional arm couplings to provide larger opening between arms.
- All transformers are coated with F class insulation material. Tests are made using 4000 volts.
- Max weld current approximately 6,000-Amps (with shortest arms, narrowest gap).
- 3.7 in. (94 mm) gap between the arms.
- 0.87 in. (22 mm) diameter arms.
- Supplied complete with 4.9 in. (125 mm) long arms.
- Max electrode force with arm length L=4.92 in. (125 mm) is 120 daN (270 lbs.)
- Max electrode force with arm length L=19.69 in. (500 mm) is 38 daN (85 lbs.)
- Max 380 spots per hour (6 – 7 spots per minute, roughly need to wait 10 seconds between welds to dissipate heat).
- Choice of additional arm configurations are available (contact TECNADirect.com for more information).
- 0.47 in. (12 mm) diameter rod for electrodes standard.
- 220V/60Hz/1-phase
- Pulsation weld time control available (P version).
TECNA 7902 SPECIFICATIONS
SPECIFICATIONS |
MODELS |
WTG-7902 |
WTG-7913 |
Gun type |
Scissor |
Manual / pneumatic |
Manual |
Pneumatic |
Power @ 50% duty cycle |
2.5 kVA |
6 kVA |
Secondary voltage |
2.5 V |
* Supply voltage (@ 50 and 60 Hz) |
220 V (IN-STOCK) 440 V (available on request) |
Delayed fuses @ 220 VAC (IN-STOCK) |
20 A |
Delayed fuses @ 440 VAC |
12 A |
Primary cables (up to 10m) |
0.098 in. (2.5 mm) |
Short circuit current |
8,200 A |
Max welding current |
6,550 A |
Duty cycle w/max welding current |
1.1% |
6.7% |
Arm minimum / maximum length |
4.9 – 19.7 in. (125 – 500 mm) |
Arm spacing (gap) |
3.7 in. (94 mm) |
Arm |
0.87 in. (22 mm) |
Electrode holder |
– |
0.55 in. (14 mm) |
Electrode diameter |
0.47 in. (12 mm) |
– |
Electrode taper |
– |
1MT/4RW |
Working stroke |
2.2 – 7.3 in. (55 – 185 mm) |
1.4 – 3.5 in. (35-90 mm) |
Max electrode force w/ 4.9″ (125 mm) arms |
264 lbs. (120 daN) |
Max electrode force w/19.7″ (500 mm) arms |
84 lbs. (38 daN) |
Pneumatic hose inside |
– |
0.24 in. (6 mm) |
Compressed air supply |
– |
87 psi (6 bar) |
Air per 1000 spots @ 72.5 psi (500 kP / 5 bar) |
– |
35 SCF (1 N/m) |
Water hose inside |
– |
0.24 in. (6 mm) |
Water cooling @ 36 psi (250 kP / 2.5 bar) |
– |
0.66 gpm (2.5 lpm) |
Dimensions (L x W x H) |
3.5 x 14.6 x 9.0 in. (90 x 370 x 230 mm) |
4.3 x 18.7 x 8.0 in. (108 x 475 x 203 mm) |
Net weight |
24.2 lbs. (11 kg) |
35.2 lbs. (16 kg) |
Packing box dimensions |
6.7 x 18.1 x 13.8 in. (17 x 46 x 35 mm) |
11.0 x 24.0 x 14.2 in. (28 x 61 x 36 mm) |
Gross shipping weight |
28.6 lbs. (13 kg) |
44 lbs. (20 kg) |
Capacity mild steel sheet |
0.10 x 0.10 in. (2.5 x 2.5 mm) |
0.08 x 0.08 in. (2 x 2 mm) |
Capacity mild steel rod |
0.32 x 0.32 in. (8 x 8 mm) |
0.24 x 0.24 in. (6 x 6 mm) |
SPRING TOOL BALANCER |
Working load required |
22 – 33 lbs. (10 – 15 kg) |
33 – 44 lbs. (15 – 20 kg) |
Short arms balancer required |
9361BR |
9362BR |
* May be supplied capable of operating on other voltages / frequencies. Please ask for details. |
For more information, on TECNA WTG-7902 Portable Spot Welding Guns, REQUEST A QUOTE, or give us a call at 844-44-TECNA or +1-216-475-5629 for IN-STOCK inventory available now with immediate shipping. You may also be interested in the TECNA 7913 – 6 kVA pneumatic gyroscopic water-cooled portable spot weld gun. Click here for details.
TECNADirect.com by Weld Systems Integrators
TECNADirect.com is a stocking master distributor of TECNA industrial welding equipment, including rocker arm spot welders, press-type spot welders and press / projection-type welders. In addition, we also carry a complete line of bench welders, portable spot welding guns, tool balancers and accessories. Best of all, we keep an inventory IN-STOCK at our Warrensville Heights, Ohio location for quick shipment and delivery.
TECNADirect.com is powered by Weld Systems Integrators, Inc., manufacturer of rugged, innovative, high-quality resistance welding equipment and machinery. For more information on Weld Systems Integrators visit www.wsiweld.com.