TECNA 610X Series 3-Phase DC Press / Projection-Type Welders

TECNA 6101D | 6102D | 6103D Welders FOR SALE at TECNADirect.com

844-44-TECNA
+1-216-475-5629
EMAIL
QUOTE

TECNA 610X series (6101D | 6102D | 6103D) 3-phase DC press / projection-type welders available from TECNADirect.com. In comparison with a traditional welder, the 610X series (6101D | 6102D | 6103D) offers the following advantages:

  • High mains power factor
  • Reduced load on plant primary electrical service
  • Balanced load distribution on the three phases
  • Reduced effect of magnetic materials between arms on the welding current
  • Reduced installation costs

Just like all of our product, the 610X series direct current three-phase welder is a high-quality welder that will get the job done!

REQUEST A QUOTE on TECNA 610X Series press / projection-type welder. Call TECNADirect at 844-44-TECNA or +1-216-475-5629 for immediate assistance.

TECNA - 6101 - 6103 Spot and Projection Welders | TECNADirect.com
FEATURESSPECIFICATIONSOPTIONS
  • Six-phase silicon rectifier with device for checking the correct diodes clamping force.
  • Protection of the diodes against overload, overvoltages, and overtemperatures.
  • Complex pneumatic cycle with low force squeeze.
  • Cylinder with chrome plated stem for heavy duty works and long life; adjustable anti-rotation device.
  • Adjustable double stroke with key control.
  • Lubrication free pneumatic components to eliminates oil mist and to protect the environment.
  • Head descent without pressure for set up and service.
  • Built-in compressed air filter unit and tank.
  • Compressed air disconnecting device.
  • Electrodes speed control valves, shock absorber for end of stroke and air discharge silencers assuring the minimum noise.
  • Two stage electric foot control for clamping and welding pieces only if correctly positioned.
  • Pre-setting for additional double stage electric foot connection for the direct recalling of welding program no.2 (not on units equipped with option 6132).
  • Water-cooled transformers, plates, electrode-holders and electrodes; transformers with epoxy resin coated windings.
  • Flow switch which makes the welder stop if the cooling water does not circulate.
  • TE553 microprocessor control unit. Phase shift welding current adjustment. Synchronous SCR contactors insulated from cooling water circuit with protection thermostat.
  • Standard on all models: two-hand safety control with timer assuring the best safety, and removable key selector. The two-hand control push-buttons are standard on projection models only (thay are available on request on spot welder model).
  • Emergency push-button to stop the machine immediately.
  • Automatic circuit breaker for protection.
  • Valve to stop the flow of the water cooling when the machine is off.
SPECIFICATIONS 6101D 6102D 6103D
Spot / projection welder • / • • / • • / –
Nominal power at 50% kVA 100 100 100
Maximum welding power kVA 415 415 380
Short circuit current kA 60 60 55
Maximum welding current on aluminium kA 55 55 50
Maximum welding current on steel kA 48 48 44
Thermal current 100% A 11000 11000 11000
No load secondary voltages V 6.1
5.5		 6.1
5.5		 6.1
5.5
Supply voltage 50Hz * V 400 400 400
Cables section L=30 m mm2 50 50 50
Delayed fuses A 125 125 125
Minimum gap mm 175 175 175
Maximum gap mm 475 475 475
Depth L mm 385 535 800
Depth D mm 260 410 –
Max. electrode force (6 bar) – standard daN 736 736 736
Max. electrode force (6 bar) with option 6135 daN 1242 1242 1242
Maximum stroke mm 100 100 100
Double stroke – standard mm 0-80 0-80 0-80
Compressed air supply bar 6.5 6.5 6.5
Air for 1000 spots (6 bar)
Standard version – stroke 20 mm Nm3 2.9 2.9 2.9
Standard version – max. stroke Nm3 9.2 9.2 9.2
With option 6135 – stroke 20mm Nm3 6 6 6
With option 6135 – max. stroke Nm3 15.5 15.5 15.5
Air supply hose mm 16 16 16
Water cooling l/min 12 12 12
Aerial noise produced dB(A) 73 73 76
Measure conditions
working stroke mm 50 50 20
welding time cycles 14 14 8
welding current kA 45 45 41
working rating in welds/min 6 6 15
Net weight (approximately) kg 650 660 710

* Different voltages and frequencies on request

  • 6132 – Rotary selector for recalling the welding programs.
  • 6133 – Double stroke control device with pneumatic foot instead of key one. To be used only for spot welding when the work necessarily requires it.
  • 6135 – Cylinder 1200 daN (diameter 125 mm double stage) total stroke 100 mm.
  • 6140 – Proportional valve.

Available AC, 3-Phase DC and 3-Phase MFDC Press / Projection-Type Welder Series from TECNADirect.com

800(x) Series 820(x) Series 821(x) Series 610(x) Series 607(x) Series 612(x) Series

For more information, on TECNA 610X Series 3-Phase DC Press / Projection-Type Welders, REQUEST A QUOTE, or give us a call at 844-44-TECNA or +1-216-475-5629 for IN-STOCK inventory available now with immediate shipping.

TECNADirect.com by Weld Systems Integrators

TECNADirect.com is a stocking master distributor of TECNA welders, including rocker arm spot welders, press-type spot welders and press / projection-type welders. We also carry a complete line of bench welders, portable spot welding guns, tool balancers and accessories. Best of all, we keep an inventory IN-STOCK at our Warrensville Heights, Ohio location for quick shipment and delivery.

TECNADirect.com is powered by Weld Systems Integrators, Inc., manufacturer of rugged, innovative, high-quality resistance welding equipment and machinery. For more information on Weld Systems Integrators visit www.wsiweld.com.